Dampco
DAMPCO HOME | All about moisture | Inspect | Drying | Ventilating | Damp Treatment | Mould remediation | Prevention | Waterproofing | Leaking showers and bathrooms | Rising damp | Condensation Dampco have the most sophisticated drying and remediation equipment in Australia

PROPERTY DRYING TO GET RID OF MUSTY ODOURS, MOISTURE AND CONDENSATION - CALL 1300 382 826

Do you have musty odours in your property? Condensation present on your windows? The presence of moisture is always the reason behind musty odours and most commonly, the dampness that causes must y odours emanates form the subfloor. After identifying and locating any water intrusion or reasons for the build of of excess moisture in the property, the building must be dried. Our drying services are the most powerful in the country because we invest in the very best equipment.

Generally speaking, the faster the drying process, the better - and the longer the drying takes, the more damage is caused by the presence of moisture. Accordingly, Dampco has invested in the most sophisticated and powerful heat drying systems available in the world today (pictured on right). The trailer mounted diesel burning 'Dragon' is designed for fast drying of both the subfloor crawl space and internal living areas. Our portable diesel fired dryer (right) is ideal for areas where we cannot manouvere our trailer. The computer controlled Drymatic (right) is designed to both heat dry and control the drying of internal areas of the affected property. Dampco can dry any section of the indoor environment, including wall cavities. We have purpose specific equipment - called an Injectidry - that can dry behind plaster walls without removing the plaster.

DRYING WITH HEAT

In the drying process, the use of heat to speed up evaporation, when combined with effective dehumidification and airmovement - creates the fastest and most thorough drying process available. Our thermostat controlled room heaters (right), our 'Dragon' subfloor dryer and our Drymatic internal drying equipment all add up to the fastest drying process available in Australia.

DRYING WITH DEHUMIDIFICATION AND AIRMOVEMENT

The traditional method of drying buildings involved the use of airmovers (pictured below right) and dehumidifiers (below right). The airmovers create movement and evaporation of the moisture and the dehumidifers remove the evaporating air from the indoor atmosphere by drying it. Whilst efficient, adding heat to the process greatly speeds up the entire process, offering quicker and more efficient relief - potentially saving thousands of dollars in repair and replacement costs.

<Our inspection equipment includes infra red cameras, inspection cameras and dust particle counters>